Downloads

The Raspberry Pi Pico is a powerful, low-cost board based on the Raspberry Pi RP2040 microcontroller. This build is the reference implementation for GP2040-CE.

The Raspberry Pi Pico W is a powerful, low-cost board based on the Raspberry Pi RP2040 microcontroller.

Another RP2040 board in the Pro Micro form factor, with 2 additional pins for USB data. This build is configured for DIY gamepad mods.

Drop in RP2040 replacement for Pro Micro builds by SplitKB.com.

The Seeed Studio XIAO RP2040 is a small RP2040 board created by Seeed Studio.

An RP2040 board in the Pro Micro form factor. This build is a drop-in replacement for the Daemonbite Arcade Encoder.

The Waveshare RP2040-Zero is a small form factor board with castellated pins and USB-C, making this a popular choice for custom built PCBs without the need for SMT assembly.

The ARC Controller is an accessibility controller. This was designed by TheTrain taking some design ideas from {jfedor2} as well as the universal standards for accessibility controller connectors.

Open source stickless controller designed by TheTrain.

Open source stickless WASD controller designed by TheTrain.

Arcade encoder board designed by TheTrain using an embedded RP2040, and is the official board of the GP2040-CE project.

Official USB Passthrough Board of the Open Stick project. Updated version of the RP2040 Advanced Breakout Board with USB passthrough included on the board.

The Zero Rhythm is a controller for the Theatrhythm game on the Nintendo Switch. It allows you to play rhythm as well as dual stick games in a double WASD layout.

Stickless PCB designed by jfedor2 using an embedded RP2040 chip.

Stickless PCB designed by jfedor2 using the Waveshare RP2040-Zero.

Mirrored version of the Flatbox Rev 5 by SkylaHila. Based on the Flatbox Rev 5 by jfedor2.

Stickless PCB designed by jfedor2 and TheTrain using the Waveshare RP2040-Zero.

Stickless PCB designed by jfedor2 and TheTrain using the Waveshare RP2040-Zero.

The GP2040-CE Keyboard Converter Case is designed to be a USB Host Device for the use of a keyboard with the GP2040-CE project.

Configuration for the Granola Summit. PCB and design files can be found here.

OSUMGP-RP2040: Open Source Universal Modern Game Pad - RP2040 Edition by NickGuyver.

Arcade encoder board designed by FeralAI using a Raspberry Pi Pico or pin-equivalent RP2040 board.

DIY universal controller pocket gamepad by MegaBitmap using an RP2040-Zero MCU soldered onto a custom PCB.

Arcade encoder board designed and sold by MiSTerAddons using an embedded RP2040 chip.

Arcade encoder board designed and sold by MiSTerAddons using an embedded RP2040 chip.

Reflex Board Open source PCB for Sega Genesis 6 button Controller replacement PCBs designed and sold by MiSTerAddons using an embedded RP2040 chip.

Reflex Board Open source PCB for NES Controller replacement PCBs designed and sold by MiSTerAddons using an embedded RP2040 chip.

Reflex Board Open source PCB for SNES Controller replacement PCBs designed and sold by MiSTerAddons using an embedded RP2040 chip.

Reflex Board Open source PCB for Sega Saturn Controller replacement PCBs designed and sold by MiSTerAddons using an embedded RP2040 chip.

Reflex Board Open source PCB for Virtual Boy Controller replacement PCBs designed and sold by MiSTerAddons using an embedded RP2040 chip.

A reduced-footprint spin off of the RP2040 Advanced Breakout Board designed by TheTrain.

A small and portable PCB-as-a-controller designed by GroooveBob using the Waveshare RP-2040-Zero.

Configuration for the Haute42 Series. The Haute42 products are all compatible with the same configuration file. These products include the Haute42 Pad M Series, T Series, G Series, and mini.

Configuration for the HautePad M Lite. The HautePad M Lite product contains special case RGB code specific to the M-Lite. The firmware uf2 will automatically set the case rgbs and mode to enable full LEDs.

Configuration for the HautePad M Ultra. The HautePad M Ultra product contains special case RGB code specific to the M Ultra. The firmware uf2 will automatically set the case rgbs and mode to enable full LEDs.

Configuration for the HautePad X Series in Analog Configuration. The HautePad X Series with the analog attachment requires a special configuration file to work immediately.

Configuration for the Mavercade Rev1. These revisions use a Waveshare RP2040-Zero board.

Configuration for the Mavercade Rev2. These revisions use a Waveshare RP2040-Zero board.

Configuration for the Mistercade V2. MiSTercade is the original JAMMA extension for MiSTer FPGA.

Configuration for the ScrubTier BentoBox.

The SGF stickless controllers are inspired by the open-source flatbox rev4 design by jfedor.